HPE StoreFabric SN2010M 18-Port 25GbE SFP28 + 4-Port QSFP28 L3 1U Half-Width Managed Switch — P05769-001

The HPE P05769-001 is the StoreFabric SN2010M 18-port 25GBASE-X SFP28 + 4-port QSFP28 Layer 3 1U rack-mountable managed switch in half-width form factor with power-to-connector airflow for data center fabric deployments. Combining 18x 25GbE SFP28 access ports with 4x QSFP28 uplink ports in a 1U half-width chassis, it delivers high-density 25GbE top-of-rack server connectivity with 100GbE uplink capacity for data center Ethernet fabric and storage networking environments.

Key Features

• 18x 25GbE SFP28 + 4x QSFP28 1U half-width managed L3 switch — high-density 25GbE ToR for data center
• 4x QSFP28 uplinks for 100GbE fabric connectivity to spine or aggregation layer
• Half-width 1U form factor — dual switch deployment in a single 1U rack space for high density
• Power-to-connector airflow for front-to-back hot-aisle/cold-aisle data center rack alignment

Product Specifications

• Part Number: P05769-001
• Manufacturer: HPE
• Model: StoreFabric SN2010M
• Access Ports: 18x SFP28 (25GbE)
• Uplink Ports: 4x QSFP28 (100GbE)
• Switching Layer: Layer 3
• Form Factor: 1U Half-Width Rack-Mountable
• Airflow: Power-to-connector (front-to-back)

Switch & Port Specifications

• Access Ports: 18x SFP28 — 25GbE server and storage connectivity
• Uplink Ports: 4x QSFP28 — 100GbE fabric uplinks to spine or aggregation switches
• Switching Capacity: Non-blocking 25GbE + 100GbE fabric for ToR deployments
• Half-Width: Two SN2010M switches can be installed in one standard 1U rack space

Network & Protocol Specifications

• Routing: Layer 3 IPv4/IPv6 routing for data center fabric deployments
• Management: In-band and out-of-band management for data center switch configuration
• Protocols: Standard data center Ethernet protocols — LACP, LLDP, VLAN, ECMP, BGP for spine-leaf
• Airflow: Power-to-connector (front-to-back) — aligns with hot-aisle exhaust in standard data center racks

Use Cases

• Data center top-of-rack 25GbE server and storage connectivity with 100GbE QSFP28 uplinks
• Storage fabric switch for 25GbE iSCSI, NVMe-oF, and Ethernet storage networking
• High-density 1U half-width 25GbE ToR switch deployments in space-constrained data center racks
• Spine-leaf fabric leaf switch with QSFP28 100GbE spine uplinks for scalable data center architecture

Compatibility

• 25GbE SFP28 transceivers and DAC cables for server and storage port connectivity
• QSFP28 100GbE transceivers and DAC/AOC cables for spine/aggregation uplink connectivity
• Standard 19-inch data center racks supporting 1U half-width switch form factor

Frequently Asked Questions

What does half-width mean for the SN2010M?

Half-width means the SN2010M occupies half the width of a standard 1U rack space — approximately 9.5 inches wide. Two SN2010M switches can be mounted side-by-side in a single 1U rack unit using an appropriate bracket, providing 36x 25GbE ports and 8x QSFP28 uplinks in a single 1U of rack space — useful for high-density ToR deployments.

What is power-to-connector airflow?

Power-to-connector airflow means air enters through the power supply end and exhausts through the port/connector end — also described as front-to-back airflow in hot-aisle/cold-aisle data center deployments. Servers and switches are aligned so cool air is drawn from the cold aisle (front) and hot exhaust exits to the hot aisle (rear), maintaining efficient data center cooling.

Can QSFP28 ports on P05769-001 be used as additional 25GbE ports via breakout?

Yes — QSFP28 100GbE ports can be configured with QSFP28 to 4x SFP28 breakout cables, converting each QSFP28 port into four 25GbE connections. This provides up to 16 additional 25GbE ports from the four QSFP28 uplinks if spine uplink capacity is not needed, giving up to 34x 25GbE total ports in all-breakout configuration.

The HPE P05769-001 StoreFabric SN2010M 18-port 25GbE SFP28 + 4-port QSFP28 L3 half-width managed switch delivers high-density 25GbE data center fabric connectivity. Order today — in stock at the lowest price.